ExtremeGrip High-Strength High-Temperature Multipurpose Adhesive
Maximum strength permanent spray adhesive engineered to withstand heat, stress, and moisture.
ExtremeGrip High-Strength High-Temperature Multipurpose Adhesive is built for maximum strength and long-term durability in demanding conditions. Engineered to withstand heat up to 240°F, moisture, and mechanical stress, it provides a permanent bond suitable for both indoor, outdoor and marine environments. Its high shear and peel strength make it ideal for marine, automotive, construction, and high-pressure lamination applications where reliability cannot be compromised. With a solvent-based, ultra-low VOC formula, this sprayable adhesive delivers fast tack, excellent versatility, and consistent performance across a wide range of substrates.
|
Key Features
|
Adheres to
|
|
Recommended Applications/Uses
|
Safety & Compliance
|
Directions
For best results surfaces must be clean, dry, and free of dust. Wipe with ExtremeGrip Cleaner Thinner, lightly sand with 180-grit, then wipe again with ExtremeGrip Cleaner Thinner. Keep temperatures above 40°F and allow to dry before applying. Spray smooth, even coats (≥2 g/ft²), using two coats on porous materials like fabric, foam, or wood. Allow 2-4 minutes for drying, then join surfaces applying firm pressure for full contact. If clogging occurs while spraying, clean tip & valve with ExtremeGrip Cleaner Thinner.
Storage
Store sealed in a cool, dry place (55–80°F). Do not exceed 120°F. Shelf life begins at manufacture date when stored properly.
Performance may vary by application. Always test adhesives under your specific conditions to ensure suitability.
